DTEN D7 55″ v2 and 75” – 2.7.5 – January 26, 2021

Update Requirements

_____________________________________________________________________________________

• Available on DTEN Orbit portal, then on Zoom portal approximately 5-7 days later
• DTEN D7 should be powered on and connected to a stable and open or Zoom whitelisted network without a firewall (ethernet preferred). For information, click here
• The update will not start if the device is engaged in a meeting or calendar event.
• The update takes approximately 30-45 minutes; DTEN D7 will automatically restart.
• Do not disconnect or power off during the update.

New

• DTEN D7 Smart Framing – The DTEN D7 Smart Framing can frame up to five individuals. Auto framing must be enabled in the camera controls for this feature
• Automatically redirect to the authentication page when connecting to a network that requires authentication
• Auto switch to Monitor Mode – In DTEN Orbit, you can disable or enable the auto switch when an HDMI cable is plugged into the device.

Modified

• n/a

Resolved

• Solved having the device automatically switch to Monitor Mode when the HDMI cable is plugged in during the meeting, thus affecting the meeting process
• Other minor bug fixes

Known Issue

• Changing the display resolution to 4K may cause higher CPU load and higher latency
• Smart Framing is imperfect and sometimes the split-screen changes frequently
• The 4K effect needs to be improved, it is not clear enough